| جزء لا | الصانع | التطبيق |
|---|
| MAX772CPA | MaximIC | 15V or adjustable, high-efficiency, low IQ, step-up DC-DC controller |
| MAX496C/D | MaximIC | 375MHz -3dB bandwidth, quad closed-loop video buffer, fixed gain +1V/V, 1600V/micros slew rate. |
| MAX8885EUK27 | MaximIC | 150mA, low-dropout, linear regulator with power-OK output. Preset output voltage 2.7V. |
| MAX4565CAP | MaximIC | Quad, low-voltage, bidirectional RF/video switch. |
| MAX6316MUK46CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.630V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX3265CUB | MaximIC | 3.0V to 5.5V, 2.5Gbps limiting amplifier. |
| MAX6332UR21D3-T | MaximIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 2.1V, reset timeout(min) 100ms. |
| MAX4534EUD | MaximIC | Fault-protected, high-voltage, single 4-to-1 multiplexer operated with +-4.5V to +-20V dual supply or a +9V to +39V single supply. |
| MAX281C/D | MaximIC | 5th-order, zero-error, bessel lowpass filter. |
| MAX923ESA | MaximIC | Dual micropower, low-voltage comparator. Intarnal 1.182V+-1% voltage reference. Internal programmable hysteresis. |
| MAX6317HUK32DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.200V, min reset timeout 1120ms, typ watchdog timeout 102ms |
| MAX4428EPA | MaximIC | Dual high-speed, 1.5A MOSFET driver. 4.5V t0 18V operation range. |
| ICL7621ACTV | MaximIC | Dual operational amplifier, 2mV |
| MAX6320PUK33CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MX7534AD | MaximIC | Microprocessor-compatible, 14-bit DAC. INL +-2 LSB. |
| MAX5153ACPE | MaximIC | Low-power, dual, 13-bit voltage-output DAC with configurable output amplifier. +3V single-supply operation. INL(LSB) +-1. |
| ICL8069DC/D | MaximIC | Low-voltage reference, Dice are specified at TA= +25C. |
| MAX9077EKA-T | MaximIC | Low-cost, ultra-small, 3microA, single-supply comparator. |
| MAX1249BEPE | MaximIC | +2.7V to 5.25V, low-power, 4-channel, serial 10-bit ADC. INL (LSB) +1,-1 |
| MAX6317HUK42BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.200V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX6316LUK32CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.200V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX767TEAP | MaximIC | 5V-to-3.3V, Synchronous, step-down power-supply controller. Ref. tol. +-1.2%, Vout 3.3V |
| MAX551ACUB | MaximIC | +5V, 12-bit, serial, multiplying DAC. Linearity(LSB) +-1/2. |
| MAX6318MHUK33AY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX532BCWE | MaximIC | Dual, serial-input, voltage-output, 12-bit MDAC. Error (LSB) +-1 |
| DG304AK | MaximIC | CMOS dual and quad analog switch. |
| MAX954EPA | MaximIC | Ultra low-power, single-supply Op Amp + comparator. Op Amp gain stability 10V/V. Supply current 5microA. |
| MAX814KESA | MaximIC | +-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.75V (max) 4.85V, push-pull active-low reset output, push-pull active-high reset output, manual reset, power-fail monitor, low-line detector. |
| MAX844ISA | MaximIC | Low-noise, regulated, -2V GaAsFET bias. |
| MAX5351BCPA | MaximIC | Low-power, 13-bit voltage-output DAC with serial interface. INL (LSB) +-2. +3.3V single-supply operation. |
