| جزء لا | الصانع | التطبيق |
|---|
| MAX4400AXK-T | MaximIC | Single, low-cost, single-supply +2.5V to 5.5V, Rail-to-Rail op amp. |
| MAX6317HUK48CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX6321HPUK26AX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX6352TYUT-T | MaximIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 3.08V (Vcc5) and 2.19V (Vcc3). Active-low open-drain reset. |
| MAX4201ESA | MaximIC | Ultra-high-speed 780MHz -3dB bandwidth, 280MHz 0.1dB gain flatness, low-noise, low-power, open-loop buffer. |
| MAX270EWP | MaximIC | Digitally-programmed, dual 2nd-order continuous lowpass filter. |
| MAX6320PUK40BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX4522CEE | MaximIC | Quad, low-voltage, SPST analog switch. |
| IH5041C/D | MaximIC | General-purpose CMOS analog switch. Dual, single pole, single throw (Dual SPST) |
| MX7535JP | MaximIC | Microprocessor-compatible, 14-bit DAC. INL +-2 LSB. |
| MAX802RCSA | MaximIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.625V. Active-low reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-2%. Power-fail comparator. Reset window +-2% |
| MAX6316MUK42AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.200V, min reset timeout 1ms, typ watchdog timeout 1.6sec |
| MAX6320PUK31BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MX7672TE05 | MaximIC | High-speed 12-bit A/D converter with external reference input. Fast conversion time 5 microsec. Linearity +-1 LSB. |
| DG305BWE | MaximIC | CMOS dual and quad analog switch. |
| MAX4174BBEUK-T | MaximIC | Single, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 12.5, 1+ (Rf/Dg) noninverting gain 13.5, -3dB BW 460kHz. |
| MAX6317HUK46DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.630V, min reset timeout 1120ms, typ watchdog timeout 1.6sec |
| MAX6348UR41-T | MaximIC | Microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 4.100V. Order increment 10k |
| MAX248EQH | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| DG403DY | MaximIC | Improved, dual, SPDT, two NO and two NC switches, high-speed analog switch. |
| MXD1013C/D025 | MaximIC | 3-in-1 silicon delay line. Output delay 25ns. |
| MAX4269EEE | MaximIC | Dual, ultra-low-distortion, single-supply, 350MHz op apm with enable. Min gain 2V/V, single-supply operation +4.5V to +8.0V |
| MAX6314US48D1-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.80V. Reset timeout period(min) 1ms. |
| MAX6317HUK48AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX6312UK49D4-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 4.778(min) 5.023(max). Nominal timeout period 1120ms. |
| MAX157BCPA | MaximIC | +2.7V, low-power, 2-channel, 108ksps, serial 10-bit ADC in 8-pin microMAX. INL (LSB) +,- 1 |
| MAX1608EEE | MaximIC | Octal SMBus-to-parallel I/O expander |
| MAX163BMRG | MaximIC | CMOS 12-bit A/D converter with track-and-hold. Error +-1 LSB. |
| MAX6316LUK33AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.300V, min reset timeout 1ms, typ watchdog timeout 1.6sec |
| MAX6306UK26D4-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 2.564(min),2.696(max) Nominal timeout period 1120ms. |
