| جزء لا | الصانع | التطبيق |
|---|
| MAX188BCAP | MaximIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX4517CUK | MaximIC | +-1V to +-6V dual-supply opration, low-on-resistance, SPST, CMOS analog switch. Normally closed (NC). |
| MAX6321HPUK38CW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX6318LHUK44DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.390V min, reset timeout 1.12sec,typ watchdog timeout 102ms |
| MAX1114AIDO | MaximIC | 8-bit,150 Msps flash ADC |
| MAX6309UK25D2-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 2.438(min),2.563(max) Nominal timeout period 20ms. |
| MAX6318MHUK40AW-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| ICM7211IQ | MaximIC | Four digit display decoder/driver. LCD, output code - hexadecimal, input configuration - multiplexed 4-bit |
| MAX4066MJD | MaximIC | Low-cost, low-voltage, quad, SPTS, CMOS analog switch. |
| MAX6346XR36-T | MaximIC | Microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 3.600V. Order increment 10k |
| MAX6316LUK32BW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.200V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX6316MUK47BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX3232EUE | MaximIC | 3.0V to 5.5V, low-power, up to 1Mbps, true RS-232 transceiver using four 0.1microF external capacitor. Low supply current 300microA. Guaranteed data rate 120kbps. |
| DG308AC/D | MaximIC | Quad, SPST, NO analog switch |
| DG401DY | MaximIC | Improved, dual, SPST, NO high-speed analog switch. |
| DG302ABWE | MaximIC | Quad, TTL compatible CMOS analog switch. |
| MAX4075BFESA | MaximIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 25V/V, noninverting gain 26V/V, -3dB BW 106kHz. |
| MAX301CSE | MaximIC | Precision, dual, high-speed analog switch. |
| MAX1110EPP | MaximIC | 2.7 V, low-power, multichannel, serial 8-bit ADC. 8-channel single-ended or 4-channel differential inputs |
| MAX406AMJA | MaximIC | 1.2microA max, single, single-supply op amp. |
| MAX6321HPUK26DW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX3867E/D | MaximIC | +3.3V, 2.5Gbps, SDH/SONET, laser driver with automatic power control. |
| MAX6318MHUK48AX-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MX674AJEPI | MaximIC | Industry standard complete 12-bit A/D converter. 15 microsec. max conversion time. Linearity (LSBs) 1. TEMPCO(ppm/C) 75. |
| MAX806RCSA | MaximIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.625V. Active-low reset. Manual reset input. Backup-battery switch. Power-fail threshold accuracy +-2%. Power-fail comparator. Reset window +-2% |
| MAX6322HPUK44C-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 140ms |
| MX566ASQ | MaximIC | High speed 12-bit monolithic D/A converter. Error +-1/2LSB |
| DG529DJ | MaximIC | 8-channel latchable multiplexer |
| MAX4567CPE | MaximIC | Dual SPDT switches, low-voltage, bidirectional RF/video switch. |
| MAX479ACPD | MaximIC | 17microA max, quad, single-supply, precision op amp. 250pA max input offset current. |
