| جزء لا | الصانع | التطبيق |
|---|
| MT8924AE | Mitel | "0.3-7V; 10mA; PCM conference circuit (PCC). For digital PBX/KTS, conference bridges, digital C.O. switchies" |
| 8C449 | Mitel | "Max=6.0V; 850mm PIN/Preamp; for datacom, general purpose, analog applications" |
| MT88V32 | Mitel | "8x4 high performance video switch array for high-end video routing and switching, medical instrumentation, automatic test equipment (ATE) and multi-media communication." |
| MT8804AP | Mitel | "8x4 analog switch array (for PABX and key systems applications, data acquisition systems, test equipment and instrumentation and analod/digital multiplexers applications)" |
| SP5669KG | Mitel | 4.5-5.5V; 2.7GHz I2B bus controlled synthesiser |
| MT8982AS | Mitel | 5V; small digital switch. For cost sensitive digital switching applications |
| MH89101 | Mitel | "Passive line termination circuit. For pair gain system, ISDN NT1 and NT2 interfaces, digital multiplexers and concentrators, ISDN U-interface terminals" |
| SL6679 | Mitel | 2-7V; direct conversion FSK data receiver. For pagers, including credit card, PCMCIA and watch pagers, low data rate receivers |
| MT88L70AN | Mitel | 3V; max=7V; 10mA; integrated DTMF transceiver. For paging systems, repeater systems/mobile radio, credit card systems, personal computers, interconnect dialers, telephone answering machine |
| NWK933 | Mitel | 3.3V; 10/100 fast enthernet transveiver to MII, |
| MT8809AP | Mitel | 4.5-13.2V; 15mA; 8 x 8 analog switch array. For key systems, PABX and key systems, mobile radio, test equipment/instrumentation, analog/digital multiplexers, audio/video switching |
| MT9074AL | Mitel | 0.3-7.00V; T1/E1/J1 single chip transceiver for T1/E1 add/drop multiplexers and channel banks |
| 1A398 | Mitel | 1.5V; 230mW; 1300mm high-performance LED; for test equipment |
| MH88400-3 | Mitel | Line interface circuit with UK line impedance. Applications interface to central office for DAA, modem, fax, answering machine and terminal equipment. |
| MH88622-3 | Mitel | Dual OPS Subscriber line interface circuit (SLIC) with 370 Om + (620 Om // 310nF) line interface for pair gain, CT2 and cordless local loop. |
| 4D469 | Mitel | 1.5V; 840mm VCSEL array; for parallel datacom, telecom |
| 1A358 | Mitel | 20V; 1300/1550mm high-performance PIN; for datacom, telecom, general purpose |
| MH8843AS | Mitel | Calling number identification circuit. For feature phone, phone set adjunct boxes, FAX machines, telephone answering machines, database query systems |
| MT90812AL | Mitel | 0.3-7.0V; integrated digital switch |
| MT9080AP | Mitel | SMX- switch matrix module. For building block for digigtal switch matrices |
| MT8889CS-1 | Mitel | Integrated DTMF transiver with Adaptive micro interface, enhanced to accept lower level signals. Applications credit card systems, paging systems, repeater systems/mobile radio, interconnect dialers and personal computers. |
| 1A192 | Mitel | 1.5V; 250mW; 880mm high-performance LED, for sensors, signal transmission |
| 1A225 | Mitel | 1.5V; 130mW; 880mm high-performance DUPLEX, for single-mode datacom |
| SL1925NP2T | Mitel | 4.75-5.25V; satellite zero IF QPSK tuner IC. For satellite receiver systems, data commnucations systems |
| MT8960AE | Mitel | 0.3-6.0V; 20mA; integrated PCM filter codec. For ST-BUS compatible, transmit/receive filters & PCM codec in one I.C. |
| MH88500IN | Mitel | Hybrid subscriber line interface circuit (SLIC) for PABX, intercoms and key systems applications. |
| SP8908 | Mitel | 6-5V; 5GHz +8fixed modulus divider |
| SL1461MPAS | Mitel | Wideband PLL FM demodulator advance information |
| MT8930CP | Mitel | 0.3-7.0V; 20mA; subscriber network interface cicuit. For ISDN NT1, ISDN S or T interface, ISDN terminal adaptor (TA), digital sets (TE1) - 4 wire ISDN interface, digital PABXs, digital line cards (NT2) |
| SA8282/IG/DP1S | Mitel | Three-phase PWM waveform generator |
